Cliff CL1235 S2/BBB PC-D/E Stereo 6.35mm 1/4 inch Phone Jack Socket PCB Mount New

Cliff Electronic Components CL1335 S2/BBB PC-D or E Stereo 6.35mm 1/4 inch Phone Jack Socket

This is a type S2 jack with 3 contacts, all break type

For PCB (printed circuit board) Mount, but you may solder to it if you decide to. The type D is supposed to be 15mm from the point where the tag narrows to C/L, which is not defined in the spec drawing I found, as far as I can tell. 15mm from that point is roughly to the top of the black plastic part below the contacts on the side. 17.5mm is roughly to the top of the tag at the contact, and 17.5mm is the measurement of type E, so perhaps this is a type E. This jack is not marked, so I am giving my best guess as to which type it is. You will need to do your own research to determine what type this is if this dimension is important to you.

This jack has a nylon hex nut with integral bezel and the bushing of the jack has external threads to accept that nut

Condition: New