Compact 16x27 in. Hydraulic Scissor Lift Table 7-38 in. Height Range Used

Compact Hydraulic Scissor Lift Table

Ships by motor freight. Free shipping applies to commercial addresses with a way to remove the product from a freight truck. Residential, farm and inner city addresses cost extra (email for a shipping quote).

16x27 in. Table Size

7-38 in. Height Range

This table does not have a dataplate to identify it, so I can only guess at its capacity. I would suggest 1000 pounds, give or take.

It is a quick raising table and slow decent when unloaded.

The table is connected to the remote hydraulic power unit by a 72 in. hose.

The motor is a 1/2 HP Baldor wired to run on 115V (115/208-230).

Condition: Used. The UP/DOWN switch is no good and needs to be replaced. Aside from that, the table goes up and down nicely. The rollers on the ends of the bottom travel bars are worn out, so the table makes some minor scraping noise as the bars move across the bottom pan. I think the previous owner used the table that way and I wouldn't personally bother to replace them unless I found they impeded use with a heavy load on (I did not test for that, so if you find that to be true, then you will have to replace them). One of the corner bars that the table would rest on when down is broken off (also not a big deal in my opinion, but you can weld back on if you want). It is cosmetically used looking, with grime, oil stains, chipped paint, oxidation, and the like. The inside bottom of the table is oxidized.

I also found that there is no automatic off when the table reaches its maximum height, so make sure you add a limit switch or make sure the operator knows to stop in time to avoid damaging something (blowing a hose or the piston, etc).